Chung Sing Machinery Co., Ltd.

Didn't find what you want? Post a Buying Lead Now!

Detail Information

Description :	1. Three-axis simul taneous feed and rapid traverse: instead of having each axis driven by a separate tiny motor, MILL uses a single powerful 3 H.P. motor to drive all three axes. This means you can be simultaneous feeds or rapid traverse on the table and the knee. The availability of power-feed on the knee (in addition to rapid traverse) enables you to do deep boring and drilling on large work pieces. 2. Cross feed leadscrew mounted in middle of knee: no more side-mounted cross leadscrew exposed to chips and dirt. The MILL crossfeed leadscrew is located inside the knee, centered so that the table movement in-and-out will not have any vibration due to uneven surface contact between the saddle and the knee.
Specification :	Table: 1. Working surface: 1300 x 300 mm. 2. Travel longitudinal x cross x vertical: 950 x 320 x 470 mm. 3. T-slot ( wide x no.x pitch ): 16 mm x 3 x 70 mm. 4. Longitudinal x cross ( 60Hz ): 13~621 mm/ min. 5. Longitudinal x cross ( 50Hz ): 11~517 mm/ min. 6. Feeds 12 steps: a. Vertical ( 60Hz ): 7~316 mm/min. b. Vertical ( 50Hz ): 6~263 mm/min. c. Longitudinal x cross ( 60Hz ): 2960 mm/min. d. Longitudinal x cross ( 50Hz ): 2467 mm/min. 7. Rapid traverse: a. Vertical ( 60Hz ): 1520 mm/min. b. Vertical ( 50Hz ): 1267 mm/min. 8. Swivel table ( left & right ): optional.
Features :	NA

Company Name:	Chung Sing Machinery Co., Ltd.
Contact Person:	Ms. Daphne
Address:	No. 55, Lane 506, Shenjhou Rd., Shengang Township, Taichung County 429, Taiwan
Telephone:	886-4-25252723
Fax:	886-4-25270957
Web Site:	http://www.vertical-machining-center-1.com http://www.chungsing.com.tw/